10 Tips For a Fast WIFI Network

setting up a fast wifi

In the modern world, a reliable and speedy Wi-Fi connection is, for most people, nothing short of essential. Whether you work from home or simply want to unwind in front of Netflix after work without constant buffering and slow speeds, you will need an effective wireless network. If you are looking to boost your existing Wi-Fi signal or set up a new one, there are many methods that can be used to achieve this. In this article we will explore 10 of the most important tips for optimizing the network connectivity in your home.

1: Place Your Router Strategically

The placement of a router is very important in ensuring good connection throughout your house. There are a few factors to consider when choosing the location of your router. Good routers transmit signal in all directions, so having the router in or near to the centre of the house should result in good coverage in every surrounding room. If you keep a router in the corner of the house, you may be wasting signal.

Experts recommend to place your router a few feet off the ground as well – this is because most routers transmit signal slightly downward from the antenna. The signal can also be blocked by more solid materials such as metal and concrete, which may appear in floors. It is also advised not to keep your router in a basement.

You should keep your router as out in the open as you can – the fewer surfaces the singla has to travel through, the stronger the signal will be. Avoid keeping your router in a closet or tucked away behind furniture. A good rule of thumb is that if you can see it, a device can probably connect to it!

2: Keep Your Router as Far From Other Electronics as Possible

Of course, a router is best placed in a room where you are using the device that is connecting to it, such as your PC, as the room that it is in the room where the signal will be the strongest. However, it is best to avoid placing it too close in proximity to many other electronic devices. Devices such as TVs, phones, microwaves, and anything else that transmits an electromagnetic signal can interfere with the signal from your router. Other objects that are particularly notorious for blocking signal are large metal items such as filing cabinets or mirrors, and objects containing water, such as fish tanks.

3: Use an Ethernet Cable for the Router’s Initial Setup 

When you are performing the initial setup of a router, you should always connect it to your computer with an Ethernet cable. Most vendors include cables with their router products to ensure that you can carry this out. Doing this helps avoid technical issues both initially and further down the line. A router that has not been fully configured with an Ethernet cable will not work as well as one that has.

4: Position one antenna vertically, the other horizontally

Conventional wisdom suggests that vertically-placed antennas are most efficient at transmitting signal, as they broadcast radio waves horizontally, covering a larger area of most houses.

However, if your router has two antennas, it is usually best to position one vertically and the other horizontally, covering both bases!

5: Configure Your Router’s Software Effectively 

Sometimes, tweaks can be made in your router’s settings to improve your network capabilities. You will most likely to enter your IP address, as well as the brand name of your router, into your web browser to do this – once you’re in, you can try one of two things.

The first option is to change the channel on which your router is operating. Crowded areas can have many, many routers on the same frequency channel, resulting in slowdown for everyone. Generally channels 1, 6, or 11 are best, and each of these is worth a try.

Another option is to actually upgrade the firmware of your router , which can improve performance (although not all brands of router will allow you to do this).

If all else fails, simply rebooting your router can resolve many issues!

6: Measure the Strength of Your Signal

Apps such as Cloudcheck and Wi-Fi Analytics allow you to see a physical data map of the Wi-Fi signal throughout your house, and identify weak spots. This can help you know how to best position the router. You could also use a wifi range extender like the WIFI Ultraboost.

7: Run a Speed Test to See if Your ISP is the Problem

internet speed test

It is possible that your Internet Service Provider (or ISP) is the problem, and not the router itself. A way to test this is to run a speed test of your router – first over Wi-Fi, and then with your PC plugged into the router via an Ethernet cable. If both are equally slow, the problem may well be your ISP, and it may be contacting your ISP support helpline or even upgrading to a different plan. If the speed test is much slower when using Wi-Fi, the router is most likely the problem itself.

8: Make Sure Your Broadband Modems are Plugged Into the Correct Router Ports

Modem cables are physically able to connect to various different parts of a router, but you should always make sure that your modem cable is connected to the uplink port rather than any other port? Broadband internet does not function through any other port! However, some devices combine the modem and router into one unit, which eliminates this problem. .

9: Keep Your Network Secure ENCRYPT YOUR WI-FI NETWORK and Enable WPA2 Security on Wi-Fi Devices (If Possible)

It is worth mentioning security in any article about home wireless networks. Most routers and ISPs will give you the option to encrypt your network during initial setup. Encrypting your network is always a good idea to prevent others from using it or accessing your data. The WPA2-ES (Wi-Fi Protected Access 2 – Advanced Encryption Standard) is the most secure option. WPA2 encryption “scrambles” your data in a way that makes it indecipherable to attackers without the key, but just as accessible to those with permission!

10: Link Devices to Each Other

More and more devices are network-capable these days, from kitchen appliances to home central heating systems. Certain apps can help you ensure that these devices and the connection device are on the exact same network, and most operating systems can automatically recognize each other.

Leave a Comment